不同流速比超声速混合层气动光学效应研究

针对不同流速比混合层流场气动光学效应问题，首先采用大涡模拟数值方法进行了数值仿真，其次用光线追迹方法进行了气动光学效应仿真，最后对混合层的气动光学效应进行了评价。结果表明，混合层流场涡结构与光程差极小值存在一一对应关系，并且其流速比低的混合层气动光学效应更加严重。同时，研究了不同光学参数对斯特列尔比的影响，得到了相应的规律。     

基于动态补偿的多电机控制算法

多电机协调控制达到转速一致是电机控制中的一个关键难题，外加负载变动和电机参数变化时会引起电机性能的下降，达不到良好的控制效果。为使电机间保持转速同步，建立了永磁同步电机d-q坐标系下的矢量控制数学模型，基于转速跟随控制，提出一种基于单神经元PID的变增益速度补偿器进行偏差耦合控制。在MATLAB/Simulink建立了3台永磁同步电机的仿真模型。仿真结果表明，与传统PID固定增益速度补偿器算法相比，单神经元PID的变增益速度补偿器具有更强的鲁棒性以及更快的收敛性。     

Research on navigation of satellite constellation based on an asynchronous observation model using X-ray pulsar

Pulsar navigation is a promising navigation method for high-altitude orbit space tasks or deep space exploration. At present, an important reason for restricting the development of pulsar navigation is that navigation accuracy is not high due to the slow update of the measurements. In order to improve the accuracy of pulsar navigation, an asynchronous observation model which can improve the update rate of the measurements is proposed on the basis of satellite constellation which has a broad space for development because of its visibility and reliability. The simulation results show that the asynchronous observation model improves the positioning accuracy by 31.48% and velocity accuracy by 24.75% than that of the synchronous observation model. With the new Doppler effects compensation method in the asynchronous observation model proposed in this paper, the positioning accuracy is improved by 32.27%, and the velocity accuracy is improved by 34.07% than that of the traditional method. The simulation results show that without considering the clock error will result in a filtering divergence.     

Non-stationarity and cross-correlation effects in the MHD solar activity

The analysis of turbulent processes in sunspots and pores which are self-organizing long-lived magnetic structures is a complicated and not yet solved problem. The present work focuses on studying such magneto-hydrodynamic (MHD) formations on the basis of flicker-noise spectroscopy using a new method of multi-parametric analysis. The non-stationarity and cross-correlation effects taking place in solar activity dynamics are considered. The calculated maximum values of non-stationarity factor may become precursors of significant restructuring in solar magnetic activity. The introduced cross-correlation functions enable us to judge synchronization effects between the signals of various solar activity indicators registered simultaneously.     

Numerical investigation on flow nonuniformity-induced hysteresis in scramjet isolator

Numerical simulation and theoretical analysis were conducted to study the hysteresis inside scramjet isolator during the reciprocating process of back pressure variation. It is revealed that only a regular reflection is theoretically possible for two leading shocks when the inflow Mach number is greater than 2.0, and no hysteresis can occur in the transition between shock reflection types. Nevertheless, wall suction, gas injection, and background waves cause non-uniformity of the incoming flow and would make hysteresis possible. Besides the classical hysteresis in the transition between shock reflection, new kinds of hysteresis were found in both the deflection angle of separated boundary layer and the location of the shock train. Moreover, the occurrence of hysteresis in the deflection angle of the separated boundary layer is accompanied with the shock reflection hysteresis. In the case with background waves or gas injection, hysteresis in the starting position of leading shock was observed too. As back pressure decreases, the leading shock does not follow the same path as that as the back pressure increases, and it is anchored at the location where the background shock or the injection interacts with the leading shock. It is inferred that, if two strong adverse pressure gradient regions move towards and interact with each other, hysteresis will take place when they start to separate.     

基于单应性矩阵的模型迎角单目视频测量方法

风洞试验中模型迎角的精准测量是降低阻力系数误差的重要途径之一，为此，提出了基于单应性矩阵的模型迎角单目视频测量方法。该方法通过两个单应性矩阵，获取试验过程中相机实时位姿和标记点物方空间位置坐标，应用坐标旋转关系，完成试验模型的迎角测量。数值仿真试验结果表明：迎角测量误差与待测标记点到风洞壁板间的距离偏差近似为线性关系，因此，当标记点不满足共面条件时，可根据该特点进行测量误差修正。静态标定和风洞迎角测量试验结果表明：修正系统误差后，迎角实测数据的测量准度在0.01°以内，精度不超过0.012°。本文方法易于实施，工程实用价值强。     

基于SRAM型FPGA单粒子效应综合防护技术

为解决基于SRAM(Static Random Access Memory,静态随机存储器)型FPGA(Field Programmable Gate Array,现场可编程门阵列)的扩频应答机在空间环境中时常发生功能故障的难题,提出了一种低轨卫星基于SRAM型FPGA的应答机的单粒子综合防护方案。该方案在代码级、器件级、单机级、整星级综合采用器件优选、结构屏蔽设计、巡检自愈、自主复位等多种方法,有效杜绝了单粒子事件带来的种种危害,已成功应用于某在轨卫星。在轨测试结果表明:遥测、遥控、跟踪测量等功能、性能指标满足任务要求,且未发生需要地面干预的问题或现象。该技术还可推广应用于其他采用低等级器件及其他类型FPGA、DSP(Digital Signal Processing,数字信号处理)等大规模集成电路的星载单机防护。     

变循环发动机双外涵匹配研究

针对带核心机驱动风扇的双外涵变循环发动机,提出了1种用于双外涵匹配分析的数值模拟方法。利用计算流体力学Fluent软件对其初步流路进行了研究及优化,在此基础上对双外涵模式流场、不同前涵道引射器状态下的单外涵模式流场进行分析。结果表明:第1外涵道的角度和流通面积对总压恢复系数的影响较大;在由双外涵模式转换到单外涵模式过程中,应将前可变面积涵道引射器开到最大以减小总压损失。该方法能够有效地应用于双外涵变循环发动机流路优化及双外涵匹配分析,为变循环技术的深入研究提供参考。     

超高温升中心分级燃烧室设计及计算分析

针对航空发动机高推重比、高温升的需求,提出1种中心分级旋流燃烧室的设计方案。在保证与现有单环腔燃烧室(SAC)进出口尺寸、机匣尺寸限制不变的情况下,对设计模型进行了3维数值模拟,并与现有的单环腔燃烧室数值模拟结果及试验结果进行了对比分析。研究结果表明:设计油气比为0.045时,设计中心分级燃烧室温升可达1356 K,出口温度分布可达0.137,出口径向温度分布可达0.096;此外,与SAC相比,中心分级燃烧室可获得更低的总压损失,更低的出口温度分布系数以及高工况下可获得更高的燃烧效率;污染排放性能表明,中心分级燃烧室在慢车点CO排放比SAC的稍高,在设计点NOx排放按g/kg燃油计比SAC的低。     

静止单站纯方位目标航向估计及仿真研究

针对平面直角导航坐标系下匀速直航目标, 利用静止单站测得目标方位序 列, 基于纯方位目标运动分析(BO-TMA)理论, 采用拟线性处理方法, 对目标航向进行 递推式估计。通过多次仿真实验,研究了不同初始条件对目标航向估计性能的影响。该 方法要求简单,便于实现,所得结论为水下隐蔽单站仅利用目标方位信息快速判断敌方 运动态势及作战决策提供了参考。